• large 4-digit LC display with illumination
• TRUE RMS measuring method for industrial applications
• direct display of the current intensity in amperes
• safe operation with a distance of 1.8 m to the measuring point
• memory of measured values (HOLD/ MIN/MAX)
• automatic switch-off („APO“), can be disabled
• battery low-voltage indication
• measuring category CAT IV 600 V
• including protective pouch and batteries

imple closing mechanism which can be operated with gloves
• green LED for stand-by mode, red LED for battery undervoltage
• measuring category CAT III 600 V
• including protective pouch and batteries

• safe current measuring up to 400 A AC
• measuring inputs for voltage, resistance, continuity and diode test

• safe current measuring up to 400 A AC
• measuring inputs for voltage, resistance, continuity and diode test

• safe current measuring up to 400 A AC
• measuring inputs for voltage, resistance, continuity and diode test
• integrated volt sensor signalises phase voltages by means of an acoustic signal and a red LED signal
• it localizes cable breaks and defective lamps in exposed cables (cable reel, light chains) via the feeding side of the phase

• safe and non-contact measuring of high currents
• DC and AC current measuring up to 600 A AC/DC

• safe and non-contact measuring of high currents
• DC and AC current measuring up to 600 A AC/DC
• measurement of low currents (automotive, photovoltaics, industry)
• measuring inputs for voltage, resistance and continuity test
• precise due to TRUE RMS measuring method

• precise due to TRUE RMS measuring method
• safe current measuring up to 1000 A AC/DC
• highest measuring category CAT IV 600 V offering optimum safety

• precise due to TRUE RMS measuring method
• safe current measuring up to 1000 A AC/DC
• highest measuring category CAT IV 600 V offering optimum safety

• precise due to TRUE RMS measuring method
• safe current measuring up to 1000 A AC/DC
• highest measuring category CAT IV 600 V offering optimum safety

• automatic selection of the correct measuring function for TRUE RMS voltage/current (AC/DC), resistance, continuity and diode test
• safe and easy operation – measuring errors due to incorrect measuring range selection are excluded
• short response time due to 5 scanning values per second
• voltage measurement with low input impedance (LoZ) to suppress capacitively/inductively induced voltages

• TRUE-RMS measurements up to 600 V, 600 A AC/DC
• effective power measurements up to 360 kW
• calculation of the power factor cos

• indication of the load type (inductive, capacitive)
• bipolar phase sequence test in three-phase mains
• measuring inputs for voltage, resistance, continuity, diode, frequency and temperature
• measurement of inrush currents (motors etc.)

• measurement of leakage currents and differential currents in electrical systems (VDE 0100) and devices (VDE 0701- 0702, BGV A3, BetrSichV ( = German Health and Safety at Work Regulations))
• highest resolution of 1 μA in the 6 mA measuring range
• measurement without switch-off during normal operation of the system/device, the perfect solution for preventive maintenance
• precise and reproducible measuring results up to 100 A
• optimum screening against external magnetic fields